Reconnaissance, Selection, and Occupation of Position (RSOP) Table 4 Practice Test

These questions are part of the practice quiz. Start practicing

• Which two positions are required on the minimum RSOP Team?
• True or False: All key personnel have to be able to perform reconnaissance, selection, occupation, and movement tasks.
• What does MWO stand for?
• What constitutes a suitable approach route to the position?
• What is the recommended number of RSOP personnel (not required)?
• What is a 'kill zone' in the RSOP context?
• In the RSOP emplacement sequence, which asset is prioritized for initial emplacement?
• What is the role of observation in RSOP?
• Which role is primarily responsible for planning and executing the RSOP mission, including personnel and equipment readiness?
• Emplacement of RL-3 launchers must be within how many degrees of the PTL/STL?
• Who possesses overall responsibility for the RSOP mission, personnel, and equipment?
• What is the purpose of 'occupying' a position?
• Which option lists the exact five items the fire control equipment soldiers set up?
• Where should latrines be located in relation to the water supply?
• What is typically included in the occupation plan?
• Elevations of prominent terrain features should be recorded within what distance of the RS UTM during ISLB data collection?
• If the RSOP OIC is lost but no team member is decertified on Table IV, what is the status of RSOP certification?
• What is the primary reason for isolating a position from enemy observation during RSOP?
• How should communications be considered when selecting a position?
• Which factor would most likely indicate potential for surprise in RSOP assessment?
• Which crew drill covers RSOP?
• Latrines must be located downwind from the water supply by how many yards?
• Which group is first in order of movement when approaching a site?
• Which statement best describes a requirement for observation posts under RSOP?
• The proper ground rod location is no more than ___ feet from the equipment.
• How far behind does a soldier follow a minesweeper?
• Which manual covers ADA Patriot gunnery?
• Who supervises the fire control, launcher, and security teams on site?
• What is the first thing established by the RSOP team at a site?
• Which is an example of a non-physical factor in RSOP assessment?
• What is the minimum distance between launchers?
• How far should the mess area be from the latrines?
• Which description best fits the meaning of partial mission capability?
• Which RSOP phase comes first?
• The RSOP NCOIC is responsible for supervising which teams on site?
• How many ISLB points can you put on a DA 7616 form? (Minimum)
• What should be included in the occupancy order?
• Which type of reconnaissance is described as the most accurate and reliable?
• RL-1 launchers are located up to how many kilometers in front of the radar?
• How does time pressure influence RSOP decisions?
• What role do maps and overlays play in RSOP?
• What is the maximum ISLB points you can put on a DA 7616 form?
• During planning, what will the commander brief the RSOP OIC on?
• How should a route to the position be planned in RSOP?
• Who determines the PTL?
• In RSOP, what role do 'sectors of fire' play?
• When selecting a position, which factors should be considered regarding water sources?
• What is the primary mission of the RSOP team?
• How does RSOP address observation posts?
• What are the three methods of recon used for RSOP?
• At a minimum, how deep must the ground rods be driven?
• In RSOP water planning, which detail is considered regarding water access?
• What appendix in TC 3-01.86 covers RSOP?
• Which of the following ranks would be the minimum for an RSOP OIC?
• What is the importance of pace counting during reconnaissance?
• What is the back-blast area of a PATRIOT Launcher?
• In RSOP SOPs, movements and occupations must cover which of the following?
• SSS stands for?
• The fire control equipment soldiers set up the five items. Which list is correct?
• When evaluating cross-fire with adjacent units, which practice is essential?
• If a team member is decertified on their Table IV but neither the RSOP OIC nor NCOIC are lost, what is the status of RSOP certification?
• Which item is NOT typically included in the occupation plan?
• Who determines the ISLB, RS location, and placing of equipment that supports the PTL and STL?
• Which four elements form the fire control platoon?
• DA Form 7618 documents Patriot Launcher Location and Alignment Data (un-surveyed).
• Which RSOP phase involves emplacement?
• Terrain feature analysis helps RSOP planners by identifying which factors?
• Where is the fuel tanker located?
• How many soldiers are in the ECP section?
• How many days worth of rations should an RSOP team bring with them?
• RSOP decertification requires which statement best describes the criteria?
• What best summarizes the RSOP end-state when occupying a position?
• Which of the following best describes the purpose of occupying a defensive position?
• How should you handle last-minute changes during RSOP?
• A ___ denotes a deadline deficiency.
• Warnings in the Patriot technical manuals are used to prevent what?
• The SSS data is used to facilitate which of the following?
• What meter interval should there be between personnel under tactical conditions?
• How should a reconnaissance report be structured?
• What elements are commonly included when describing contingency planning for RSOP?
• What is the maximum cross roll for the Antenna Mast Group (AMG)?
• What is the minimum requirement for an RSOP Team?
• What is the required area for a Patriot Fire Platoon?
• RL1/RL3 are used for intercepting what?
• Which statement is true regarding site layout briefing?
• Who briefs the commander and FP PL about site layout and additional circumstances?
• Who will determine all clear or a lower MOPP level?
• What does AMG stand for?
• The primary authority for determining the PTL is:
• What is the most accurate and most reliable type of reconnaissance?
• Which factor is essential when determining a position's field of fire?
• The down-range section consists of which personnel?
• Which planning factor is directly affected by weather conditions?
• What is an example of poor position choice?
• What documents are typically produced during RSOP?
• What does ISLB stand for?
• In RSOP, what is the primary criterion for choosing a route to the position?
• While shooting ISLB data, within what distance of the RS UTM should elevations of prominent terrain features be recorded?
• Do mine sweepers carry their weapons while sweeping?
• What is meant by 'redundant cover' in a position?
• What is the distance range for Remote Launcher 1 to counter threats?
• When selecting a position, what communication requirement is essential?
• What is the difference between reconnaissance of terrain and reconnaissance of routes?
• What are the 3 types of north?
• Which is established first by the RSOP team at a site?
• What is the importance of redundancy in security measures?
• What is the distance range for Remote Launcher 3 to counter threats?
• Which item is included in recon considerations besides route?
• Recon considerations must include which items?
• What is the primary objective of reconnaissance in RSOP?
• Which publication contains the RSOP checklist?
• An RSOP team should recon two different routes; what are they?
• What is the purpose of reconnaissance notes?
• Which statement accurately reflects RSOP decertification criteria?
• What is the first piece of equipment to be emplaced in the RSOP sequence?
• Which form documents Patriot Launcher Location and Alignment Data (surveyed)?
• Which statement best reflects how weather affects RSOP planning?
• What is the SSS used for?
• What does PTL stand for?
• What is meant by 'sectors of fire' in RSOP?
• True/False: The planning phase must include a briefing on the new mission, enemy and friendly situations, and proposed location to the RSOP OIC.
• Which of the following statements correctly describes the RSOP team's minimum personnel requirement?
• CBRN domains refer to threats in which areas?
• What is the purpose of supporting fire in RSOP?
• True/False: RSOP NCOIC briefs the operation order to the RSOP team and verifies all equipment and supplies are loaded IAW the load plan.
• DA Form 7616 relates to which Patriot data?
• What is a typical feature of a well-occupied position?
• Local launchers are placed in which formation?
• Which statement best describes CBRN in a security context?
• Which factor is considered during terrain analysis for RSOP?
• What is the maximum distance required for ISLB data?
• How often should RSOP crew members take the Table 4?
• What does observing approach routes help achieve?
• What information should a position sketch include?
• If a system is designated as partially mission capable, which statement most closely aligns with RSOP terminology?
• True/False: RSOP NCOIC "ensures" that all equipment is present IAW load plans, all RSOP vehicles are mission capable, and all team personnel are present.
• Where can the RSOP checklist be found?
• Under RSOP, decertification occurs when which of the following events occur?
• The ammo storage is protected by which features?
• What is the maximum allowable slope for the radar emplacement area?
• What best describes the end state of RSOP after occupation?
• What is the max length a ground rod will extend from the ground?
• Which of the following best describes the distance between the radar and the rear area down-range?
• DA Form 7620 covers Patriot Launcher Supplemental Roll and Cross roll.
• RSOP stands for?
• DA Form 7619 documents Patriot Launcher Location and Alignment Data (surveyed).
• Who does the RSOP OIC give the ISLB data to and when?
• Concealment in RSOP is used primarily to reduce detectability by the enemy and maintain operational surprise.
• DA Form 7617 covers which data?
• Assuming there are three RSOP personnel on site, how many must be CLS certified at minimum?
• Which statement best describes RL-1 and RL-3 placement capabilities?
• What measures are used to mitigate exposure when moving to a position at night?
• In RSOP, what is the purpose of conducting a reconnaissance of the route?
• What is the first step in preparing the RSOP team for their mission?
• Which form documents Patriot Radar Location and Alignment Data?
• What does the up-range section consist of?
• The SSS provides which data types for manual emplacement?
• Which statement best describes the purpose of route reconnaissance?
• Why is security a key criterion when selecting a position?
• How are contingencies captured in an RSOP plan?
• The fuel tanker is placed near the primary entrance to serve what purpose?
• What is meant by 'fire discipline' in RSOP?
• What is the hazard distance for the Radar System?
• What is the minimum area size for radar emplacement?
• How many entrances and exits does the site need to have?
• Which RSOP team member is responsible for determining the ISLBs, PTL and STL and the site of radar?
• What is the dismount point for equipment on site?
• What is the significance of mine and obstacle awareness in RSOP?
• Which element is not typically included in a position sketch?
• Which roles make up the up-range section?
• What is the role of camouflage in RSOP?
• Which describes the end state of RSOP when occupation is complete?
• What are the four phases of RSOP?
• How do you determine a position's field of fire coverage?
• What is a key security measure after occupying a position?
• Which pair defines the RS-LS spacing constraints for local launchers?
• What criteria are used to judge a position's suitability?
• What is the maximum threat-countering distance for Remote Launcher 3?
• Select a correct expansion for CBRN from the options below.
• What does CBRN stand for?
• Which statement best describes the RSOP OIC's action regarding ISLB data after ECS arrival?
• What is the purpose of an overlay or map?
• Who is first in order of movement when approaching a site?
• What two forms are used for PMCS?
• Where is the ammo stored?
• Under tactical conditions, inter-personnel spacing should be approximately how many meters?
• What is the purpose of a rehearsal in the RSOP process?
• What symbol denotes partial mission capability in RSOP markings?
• The down-range section lies in two launchers on either side of the ___.
• What role does time of day play in RSOP?
• In RSOP terminology, partially mission capable is denoted with which symbol?
• How many launchers does the down-range section contain?
• Which item is included in the occupation plan?
• To maximize mutual support and minimize gaps, how should adjacent sectors of fire be managed?
• Which tactic best reduces exposure when moving to a position under cover of darkness?
• What is the minimum number of personnel for an RSOP team?
• What is a common error in RSOP position selection?
• How can terrain feature analysis influence ROA (rates of advance) decisions in RSOP?
• What is the purpose of an occupancy checklist?
• What is the maximum RS-LS distance for a local launcher?
• At minimum, how many RSOP personnel must be CLS certified?
• What are remote Launchers RL 1/RL 3 used for?
• In RSOP, redundant cover refers to which concept?
• How does terrain slope affect position selection?
• What distance consideration is key when assessing proximity to support elements?
• Which manual covers battalion/HHB RSOP?
• What is the distance range for the Local launcher to counter threats?
• What is the distance from the radar to the rear area down-range?
• Which elements would you expect to see summarized in the reconnaissance report's findings?
• What is the purpose of a position maintenance plan in RSOP?
• Which manual covers Battery RSOP?
• What unit is used to express the back-blast area measurement?
• What is the minimum RS-LS distance?
• How do you acquire the ISLB?
• What Rank can an RSOP OIC be?
• Where is the maintenance area located?
• What is the maximum roll for the Antenna Mast Group (AMG)?
• What is the minimum distance required for ISLB data?
• Why is concealment important in RSOP?
• OSLB stands for?
• Which point serves as the dismount location for FP element arrivals?
• Who is responsible for briefing the 1SG and PSGs on site layout, tactical situation, and unusual circumstances?
• Which location serves as the dismount point for the arrival of FP elements?
• Which form would you use to document Patriot Launcher Location and Alignment Data (un-surveyed)?
• Who is responsible for verifying that equipment and supplies are loaded IAW the load plan?